30 kw Motor Corrugated Sheet Roll Forming Machine With Non - stop Tracking Punching
Introduction of machine
- Material feeding width: max 1250mm, Q235,
- The max thickness of material: 2mm.
- Forming speed: 6-15mm/min including punching, not including cutting.
- This line includes hydraulic decoiler with coil car, guide, forming, punching, curving, cutting, simple stacker.
Main Forming machine
- Incl. steel plate feeding and guide, manual adjusting centering, roll forming.
- Preciseness of single wave height and distance: ± 2mm
- Plate after forming, plate surface and edge smooth, no obvious scratch.
- Forming station: 20 stations in total (16 stations, 2 stations for reshaping, first station roller has feeding function, two ends rollers has guiding function) , roller material GCr15.
- Motor:2 sets, 15kw each.
- Speed: 6-15mm/min including punching, not including cutting.
- Machine structure: Stand column and gearbox driving for each stations.
- Control: by PLC Taiwan Delta, touch screen Chinese brand, with remote control.
Detail date of main part
| Item |
Description |
| Hydraulic Decoiler with coil car |
- Max feeding width: 300-1250mm
- Max loading capacity: 10T
- Max coil diameter: 1500mm
- Inner coil diameter: 460-560mm
-
|
| Punching part |
- Non-stop tracking punching
- Servo motor 5.5kw, encoder, ball screw transmission
- Hydraulic station by China Wansheng
- Punching preciseness:
- hole +0.3mm；
- hole distance (width direction): ±1mm
- hole distance (length direction): ±2mm
- Screw hole: smooth, shape good
- Punching die: Cr12MoV material, heat treatment, 60-62HRC. One set of punching head with one line.
|
| Curving machine |
- Curving way: three roller curving
- Feeding width: 1500mm
- Speed: the same speed as main forming machine.
- Max curving diameter: 2m.
- Structure: stand column.
|
| Cutting part |
- Share hydraulic station with punching part.
- Cutting way: hydraulic cutting, cutting angle adjustable, can match with curving.
- Length accuracy: ±2mm；
- Cutting blade: Cr12MoV, heat treatment, 60-62HRC
-
|
| Stacker |
- After cutting, finished product output by stacker.
- Automatic conveying, stacking by hand.
|
