Model Type GTS118+ TW200 Orbit Tube Welding Machine 31.8mm - 114.3mm Diameter
1.Welding condition:
All position welding.
Welding way: tube to tube welding, no need beveling.
Wall thickness above 2.5mm, need to change open gun with power source.
2.Suitable tube
| diameter: | GTS80: 31.8mm-114.3mm； |
| Tube thickness: | 0.8-2.5mm |
| Material: | carbon steel, SS steel, Titanium, Titanium alloy. |
| Welding part of Tube center | min rotating radius 72.5mm, min straight part length can be clamped is 25mm. |
3.All position welding:
Welding pool is effected by different forces as picture, gravity, surface tension, arc spraying force, only gravity direction the same in different position, other two force directions always change, so welding parameter has to be set in several areas to meet welding requirements.
4.Advantage:Graphical operating interface, easy, simple.
Divisional function, max can be ten, parameter can change according to requirements.
Parameter can adjust any time during welding process, to reach special requirement on some welding seam.
Perfect fault detection, directly show fault cause,scientific modular design, easy maintenance and prepare.
Simple and direct parameter interface, timely show welding condition;
Adopt Germany Siemens PLC and Germany EWM machine core, make sure machine reliability.
220V single phase power supply, inside switch power modular supply power; ensure outer power wave within 20% to guarantee welding seam repetitiveness.
Auto programming function, not rely on too much on skilled operator.
Adjust freely remote or nearby control, easy operation.
One key printing, auto printing function
Auto reset function
Parameter password protection function.
5.Main parts supplier
| | Parts | Maker |
| 1 | Welding power source | German EWM |
| 2 | Control | Siemens PLC |
| 3 | Touch screen | Taiwan |
| 4 | Rotating drive | KEYA |
| 5 | Water tank cooling pump | Italian CEME |
| 6 | Welding head motor | Switzerland MAXON |
