Downspout Roll Forming Machine with 16 Stations and 12m/min Rolling Speed
Quick Detail:
Rolling stations: 16
Motor power: 3 KW
Rolling speed: about 12m/min
Specifications:
| Rolling speed: about 12m/min | host Machine: 1 set |
| Rolling thickness: 0.36 mm | PLC: 1 unit |
| Coil width: about 100mm | Electric control cabinet: 1 set |
| Rolling stations: 16 | Shearing system: 1 unit |
| Axle dia: Φ60mm 45＃steel | Manual decoiler: 1 unit |
| Motor power: 3 KW | Run-out table: 1 unit |
Cut off with saw pneumatically
Forming roller; 45#steel with chrome
Control system: PLC (Mitsubishi)
Outer size: 0.7m*0.7m*0.8m
Technological process of downpipe roll forming machine:
Uncoiling---Feeding---Leveling---Punching----Roll forming---Cutting---Products collecting
More Machines Pic
Downspout (Down pipe) is a pipe for conveying rain water from a roof or gutter to the ground, also referred to as Leaderpipe, Downpipe, or Drainspout. The downspouts are more and more widely applied in rain water storage solution. Downspout disconnection (sometimes called roof leader disconnection) represents a cost-effective on-site alternative for reducing the volume and cost of stormwater that requires public management. Runoff from residential rooftops is collected by eaves troughs, which are installed along the edge of the roofline. Water collected in the eaves trough is conveyed to ground level by one or more downspouts. Downspouts may then connect directly into the storm sewer system into a combined storm and sanitary sewer system. Disconnecting downspouts brings a number of economic and environmental benefits to the municipality and the homeowner
Our roll forming line of downspout machines run copper, steel, or aluminum. These are also ideal for piping for the HVAC industry for small sizes ductwork.
