Samll Cable Tray Roll Forming Machine with Hydraulic Cutting Blade
Technical proposal
| Name | Item | Specification |
| Coil requested | Material | Color steel, galvanized steel |
| Thickness | 0.3-0.7mm |
| Tensile strength | 235Mpa |
| Coil width | 360mm |
| Decoiler (1 unit) | Type and weight capacity | Manual decoiler, 5T |
| Inner diameter | 498-508mm |
| Outer diameter | Max:1800mm |
| Rollforming machine (1 unit) | Rolling speed | 15m/min |
| Motor | 7.5KW, 3phase, 60Hz, 380V |
| Rolling step | 17 |
| Driving system | Chain transmission |
| Structure of machine body | Entire wall steel structure |
| Material of roller | 45# steel, chromed thickness0.05mm |
| Diameter of shaft | 80mm |
| Dimession | Abt.13m*1.8m*1.6m |
| Weight | Abt.13T |
| Electric control cabinet(1 unit) | Main component | PLC, frequency convertor, touching screen, encoder |
| Cutting and length measurement | Automatic stop to cut, encoder |
| Brand | From Japan, can be chosen by client |
| Hydraulic station (1 unit) | Power and strength | 3.5KW, 16Mpa |
| Cutting machine (1 unit) | Material of blade | GCr12 mov steel, heatment and hardness up to HRC58-62 |
| Cutting type | Hydraulic cutting |
| Run out table (1 unit with 4pics) | Size | 1.2m*0.7m*1.2M |
Processing flow:
Manual decoiler----feeding&guiding----rollforming----hydraulic cutting--- run out table
Application:
- The roof panel used as the roofing of factory, garage,warehouse, reliable and safety installation is easy to realize.
- Good toughness: with super toughness, Tere is no necessary to do any treatment amontg the nail hole, it is sealing and can prevent leaking water.
- Long life: life ≥ 25 years, is an alternative to steel tile.
- Corrosion resistance: strong acid, alkali, salt, anti-static, anti-vapor corrosion, etc.
- Noise performance: noise performance is good, away from the noise.
Engineering Project
