Embosser Equipped Roof Panel Roll Forming Machine with Double Layer
Technical Proposal:
| Name | Item | Specification |
| Coil requested | Material | color steel, aluminum coil |
| Thickness | color steel:0.2-0.4MM ,aluminum coil:0.3-0.7mm |
| Tensile strength | 235Mpa |
| Coil width | 1200mm,1220mm |
| Decoiler(1 unit) | Type and weight capacity | Manual decoiler, 5T*2 pics |
| Inner diameter | 498-508mm |
| Outer diameter | Max:1800mm |
| Embosser(1 unit) | motor | 3kw |
| Weight | 2T |
| Size | 2.4m*1.3m*1.7m |
| Rollforming machine (1 unit) | Rolling speed | 15m/min |
| Motor | 7.5KW*2pics, 3phase, 60Hz, 380V |
| Rolling step | up:19 down: 21 |
| Driving system | Chain transmission |
| Structure of machine body | Entire wall steel structure |
| Material of roller | 45# steel, chromed thickness0.05mm |
| Diameter of shaft | 80mm |
| Dimession | Abt.13m*1.8m*1.6m |
| Weight | Abt.15T |
| Electric control cabinet(1 unit) | Main component | PLC, frequency convertor, touching screen, encoder |
| Cutting and length measurement | Automatic stop to cut, encoder |
| Brand | From Japan, can be chosen by client |
| Hydraulic station (1 unit) | Power and strength | 3.5KW, 16Mpa |
| Cutting machine(1 unit) | Material of blade | GCr12 mov steel, heatment and hardness up to HRC58-62 |
| Cutting type | Hydraulic cutting |
| Run out table(1 unit with 4pics) | Size | 1.2m*0.7m*1.2M |
Processing Flow:
Manual decoiler----embossing----feeding&guiding----rollforming----hydraulic cutting--- run out table
Application:
- The roof panel used as the roofing of factory, garage,warehouse, reliable and safety installation is easy to realize.
- Good toughness: with super toughness, Tere is no necessary to do any treatment amontg the nail hole, it is sealing and can prevent leaking water.
- Long life: life ≥ 25 years, is an alternative to steel tile.
- Corrosion resistance: strong acid, alkali, salt, anti-static, anti-vapor corrosion, etc.
- Noise performance: noise performance is good, away from the noise.
Engineering Project :
